Please Sign In
Username
Password
Parts Catalogue
Assemblies and Builds
Battery Cables
Brackets
Braid, Tubing, and Heatshrink
Buss Receptacles
Cable Tie and Clips
Camera Cables
Chemicals and Compounds
Conduit and Fittings
Connectors and Retainers
Connector Wire Seals
Covers and Boots
Diodes and Resistors
Electrical Device Mountings
Electronic Modules
Enclosures
E-Stops
Fuses and Circuit Breakers
Grommets and Glands
Hardware and Terminal Studs
Harnesses and Adaptors
Hour Meters
Jumpstart
Kits
Level Monitoring
Labels and Decals
Lights
Light Bars
Lockouts
Magnets
P Clamps
Pressure Monitoring
Proximity Switches
Radio Frequency
Relays
Replacement Harnesses
Reverse Alarms and Sonars
Switches and Contacts
Temperature Monitoring
Terminals and Lugs
Tooling
Uniswitches
Wire
Part Number
Colour
Black
Black & Chrome
Gold
Gray
Green
Red
Silver
Stainless
White
Yellow
Material
Aluminium
Aluminum
Aluminum / Carbon Steel
Aluminum / Stainless Steel
Aluminum/Stainless Steel
Brass
Carbon Steel
Copper
CRS
EPDM
EPDM RUBBER
Galvanised Steel
Galvanized Steel
GI
Glass-filled nylon bushing
Hi-Tensile Steel
HSS
Lead
Metal
Mild Steel
Nylon
Plastic
Polyamide
polyisobutylene
Polypropylene
PVC
Reinforced Thermoplastic
Rubber
Sinc
SS304
Stainless Steel
Stainless Steele
Steel
Zinc
Zinc Plated Metal
Nominal Thread Size
1 mm
1/2
1/4
10 mm
2.2
3.2 mm
3/16
3/8
4.2 mm
5/16
5/32
6mm
8 mm
M10
M12
M16
M2
M20
M24
M3
M30
M39
M4
M5
M6
M8
M9
PG7
Pitch
0.3 mm
0.5 mm
0.50
0.50 mm
0.7 mm
0.70 mm
0.70mm
0.8 mm
0.80
0.80 mm
1
1 mm
1.0 mm
1.00
1.00 mm
1.2 mm
1.25
1.25 mm
1.5 mm
1.50
1.50 mm
1.6 mm
1.75
1.75 mm
1.75mm
1.8 mm
12.15
1mm
2 mm
2.0
2.00
2.00 mm
2.5mm
3 mm
4 mm
N/A
Type
Bolt
Bolt Stud
Bolts
Button
Clinch Nut
Clinch Stud
Clip
Countersunk
Countersunk Screw
Flange Nut
Flat Washer
Gas Strut
Handle
Hinge
Hook Plate
Key
Latch
Lock Nut
Lock Washer
Nut
Nyloc nut
Nylock Nut
Rivet
Rivet Nut
Rod
Rubber Sheet
S/Tap
Screw
Spring
Spring pin
Spring Washer
Stopper
Stud
Sunk Screw
Swivel
T-Llock
Tape
Thumb Nut
Thumb Screw
Washer
Description
1/2 INCH UNC FLAT WASHER HIGH TENSILE
1/2 INCH UNC X 3 1/2 HEX BOLT HIGH TENSILE
1/2 INCH X 1 INCH UNC HEX BOLT S/S
1/4
1/4 RIVET NUT STAINLESS STEEL
1/4-14 X 3/4 SELF-DRILLING HEX SCREW GI
10-16 X 3/4
10M HEX NUT NC
160 mm BATTERY CLIP
19 MM STAUFF CLAMP HEAVY DUTY
19 MM STAUFF STD PIPE CLAMP
25.4 MM STAUFF CLAMP HEAVY DUTY
25.4 MM STAUFF STD PP PIPE CLAMP
26.9 MM STAUFF CLAMP HEAVY DUTY
32 MM STAUFF HVY PP PIPE CLAMP C/W STEEL TOP/BASE
33.7mm STAUFF STD PP PIPE CLAMP
38 MM STANDARD PP PIPE STAUFF CLAMP
42MM STAUFF STD PP PIPE CLAMP
5/16 SS Flat Washer
5/8
5/8 INCH X 45MM HEX HEAD BOLTS SS
57 MM STAUFF CLAMP HEAVY DUTY
ALUMINIUM STEEL MULTI GRIP RIVET H2S 4 X 16
ALUMINUM - STAINLESS STEEL MULTI GRIP RIVET
Aluminum - Stainless Steel Multi Grip Rivet 3.2x10mm
Aluminum - Stainless Steel Multi Grip Rivet 4.0x10mm
Aluminum - Steel Multi Grip Rivet 4.0x10mm
Aluminum - Steel Multi Grip Rivet 3.2x10mm
Aluminum - Steel Multi Grip Rivet 4.0x12mm
ALUMINUM STEEL MULTI GRIP RIVET H2S 3.2 X 12
ALUMINUM STEEL MULTI GRIP RIVET H2S 3.2 X 16
ALUMINUM STEEL MULTI GRIP RIVET H2S 3.2 X 20
ALUMINUM STEEL MULTI GRIP RIVET H2S 4 X 20
Amalgamating Tape
ARMREST CATERPILLAR
BLIND RIVETS 3MM X 10MM
BLIND RIVETS STAINLESS M4X10
BOX SEAL (with Metal)
BRASS HEX STANDOFF
BREATHER
BTN HD SKT SCR MS M6x20
BTN HD SKT SCR MS M8x25
BTN HD SKT SCR SS A2 ISO7380 M5x20
BTN HD SKT SCR SS A2 ISO7380 M8x16
BTN HD SKT SCR SS M4x10
BTN HD SKT SCRW SS M8x20
Bussman Monitoring Mounting Bolt
Butt Hinges SS 25x75
C/S Screw PHL 965 ZN M6x20
Cap Nut SS M6
Catch Plate
Chassis Clip
CHSE-HD RSD PHL 7985 ZN M5x10
CHSE-HD RSD PHL. 7985 ZN M4x10
CHSE-HD Screw SLT 84 ZN M3x40
CHSE-HD Screw SLT 84 ZN M4x20
CLIP NUT
COLD-ROLLED STEEL HOLDER
Concealed Hinges Stainless Steel 304
CONNECTOR MOUNTING BRACKET 2 MODULES
CONNECTOR SPRING
CS16 BALL JOINT, M10 X 1.5
DIN RAIL STOPPER/FASTENER
Dome Head Socket Screw SS M6x16
Draw Latch (Adjustable Type)
DRAW LATCH ADJUSTABLE SMALL SIZE
Drawer Slide 14' Full Extension , Black
Electrical Terminal Stud (Black)
Electrical Terminal Stud (Red)
FH-M4-12ZI STUD FLUSH HEAD STL
FH-M4-25ZI STUD FLUSH HEAD STL
FH-M5-12ZI STUD FLUSH HEAD STL
FH-M5-25ZI STUD FLUSH HEAD STL
FH-M6-16ZI STUD FLUSH HEAD STL
FH-M6-25ZI STUD FLUSH HEAD STL
FH-M6-30ZI STUD FLUSH HEAD STL
FH-M8-16ZI STUD FLUSH HEAD STL
FH-M8-25ZI STUD FLUSH HEAD STL
FH-M8-30ZI STUD FLUSH HEAD STL
FH4-M4-10 SELF-CLINCHING STUDS FOR S/S
FH4-M4-12 SELF-CLINCHING STUDS FOR S/S
FH4-M4-20 SELF-CLINCHING STUDS FOR S/S
FH4-M4-25 SELF-CLINCHING STUDS FOR S/S
FH4-M5-12 SELF-CLINCHING STUDS FOR S/S
FH4-M5-25 SELF-CLINCHING STUDS FOR S/S
FH4-M6-16 SELF-CLINCHING STUDS FOR S/S
FH4-M6-25 SELF-CLINCHING STUDS FOR S/S
FH4-M8-16 SELF-CLINCHING STUDS FOR S/S
FH4-M8-25 SELF-CLINCHING STUDS FOR S/S
Flange Button Head Plated MS 8x25
Flat Washer G.I. 1/4
Flat Washer G.I. 8mm
Flat Washer GI 1/4
Flat Washer GI 5/16
Flat Washer GI M4x5
Flat Washer MS M12x20
Flat Washer MS M6
Flat Washer MS M6x12
Flat Washer MS Plated M8x15.6
Flat Washer SS 1/4
Flat Washer SS 3/16
Flat Washer SS 5/32
Flat Washer SS A2 DIN 125 M10.5
Flat Washer SS A2 DIN 125 M3 ID3.2
Flat Washer SS A2 DIN 125 M5 ID5.3
Flat Washer SS A2 DIN 125 M6 ID6.4
Folding T-Handle Lock
FOOT BEARING RUBBER MOUNT
Full Threaded Rod M6
Full Threaded Rod SS M6
Gas Spring 500 mm
GAS STRUT/SPRING (300 N)
Gray Single Sided Foam Tape 3mm x 12mm
Gray Single Sided Foam Tape 6mm x 12mm
GROUND STRAP
Gypsum Tek Screw 6x38 (Black)
Gypsum Tek Screw M6x50 (Black)
Hex Head Bolt MS M10x30
Hex Head Bolt MS M8x16
Hex Head Bolt SS M10x25
Hex Nut HT M39
Hex Nut MS 1/2
Hex Nut MS M12
Hex Nut MS M6
Hex Nut SS M4
Hi-Tensile Button Head Screw M12x35 w/Nut & FW
Hi-Tensile Button Head Screw M20x55 w/Nut & FW
HIGH TENSILE SPRING PIN
HT Cap Screw M6x20
HX HD Set Screw SS A2 DIN 933 M10x60
Joiner PL259 Bulkhead
Lashing Ring
Lift and Turn Latch (w/ Key)
Lift-Off Hinges
Lock Washer GI 1/4
Lock Washer MS Blk 1/2
M10 Battery Negative Stud
M10 FLANGED NYLOCK NUT ZINC PLATED
M10 FLAT WASHER S/S
M10 FLAT WASHER ZP
M10 HALF HEX NUT ZP
M10 HEX NUT ZINC PLATED
M10 INTERNAL TOOTH-LOCK WASHER
M10 LOCK NUT S/S
M10 LOCK WASHER STAINLESS STEEL
M10 LOCK WASHER ZP
M10 NYLOC NUT S/S
M10 NYLOC NUT ZP
M10 PENNY WASHER S/S
M10 RIVET NUT ALUMINUM
M10 Weld-On Button
M10 X 100 HEX HEAD BOLT S/S
M10 X 100 HEX HEAD ZP
M10 X 130 HEX HEAD BOLT SS
M10 X 16 ALLEN CUP HEAD S/S
M10 X 16 ALLEN CUP HEAD ZP
M10 X 16 HEX HEAD S/S
M10 X 16 HEX HEAD ZINC PLATED
M10 X 20 ALLEN CUP HEAD S/S
M10 X 20 ALLEN CUP HEAD ZP
M10 X 20 ALLEN DOME HEAD S/S
M10 x 20 Foot Bearing
M10 X 20 HEX HEAD S/S
M10 X 20 HEX HEAD ZP
M10 X 25 ALLEN CUP HEAD S/S
M10 X 25 ALLEN CUP HEAD ZP
M10 X 25 ALLEN DOME HEAD S/S
M10 X 25 HEX BOLT ZP
M10 X 30 ALLEN COUNTERSUNK HEAD S/S
M10 X 30 ALLEN CUP HEAD S/S
M10 X 30 ALLEN DOME HEAD S/S
M10 X 30 HEX HEAD BOLT S/S
M10 X 35 HEX HEAD BOLT S/S
M10 X 40 ALLEN CUP HEAD S/S
M10 X 40 ALLEN CUP HEAD ZP
M10 X 40 HEX HEAD BOLT S/S
M10 X 45 HEX HEAD BOLT S/S
M10 X 50 HEX HEAD BOLT S/S
M10 X 60 ALLEN DOME HEAD ZP
M10 X 60 HEX HEAD S/S
M10 X 60 HEX HEAD ZP
M10 X 75 ALLEN DOME HEAD S/S
M10 X 75 HEX HEAD S/S
M10 X 75 HEX HEAD ZP
M10 X 80 ALLEN DOME HEAD S/S
M10 X 80 HEX BOLT S/S
M10 X 90 HEX HEAD ZP
M12 FLAT WASHER SS
M12 FLAT WASHER ZP
M12 HEX NUT S/S
M12 LOCK WASHER ZP
M12 NYLOC ZP (FINE THREAD)
M12 NYLOCK NUT
M12 PENNY WASHER ZP
M12 SERATED HEX FLANGED NUT ZP
M12 X 100 HEX HEAD BOLT SS
M12 X 120 HEX BOLT ZINC PLATED
M12 X 130 HEX HEAD BOLT SS
M12 X 20 ALLEN CUP HEAD ZINC PLATED
M12 X 20 ALLEN DOME HEAD ZP
M12 X 20 HEX HEAD BOLT ZINC PLATED
M12 X 200 HEX HEAD HALF-THREADED BOLT
M12 X 25 ALLEN CUP HEAD ZP
M12 X 25 ALLEN DOME HEAD S/S
M12 X 25 HEX HEAD BOLT ZINC PLATED
M12 X 30 ALLEN DOME HEAD SS
M12 X 35 ALLEN CUP HEAD ZINC PLATED
M12 X 35 ALLEN DOME HEAD ZP
M12 X 35 HEX HEAD BOLT ZINC PLATED
M12 X 40 ALLEN DOME HEAD S/S
M12 X 40 HEX HEAD BOLT S/S
M12 X 40 HEX HEAD ZP
M12 X 50 ALLEN CUP HEAD ZINC PLATED
M12 X 50 ALLEN DOME HEAD ZP
M12 X 50 HEX HEAD ZINC PLATED
M12 X 70 HEX HEAD BOLT ZINC PLATED
M12 X 75 ALLEN CUP HEAD ZINC PLATED
M12 X 75 ALLEN DOME HEAD ZP
M12 X 80 HEX HEAD BOLT S/S
M12 X 90 ALLEN CUP HEAD ZINC PLATED
M12 X 90 ALLEN DOME HEAD ZP
M12 X 90 HEX HEAD BOLT HIGH TENSILE
M12 X 90 HEX HEAD BOLT ZINC PLATED
M16 FLAT WASHER S/S
M16 HEX NUT S/S
M16 LOCK WASHER S/S
M16 NYLOCK NUT S/S
M16 NYLON WASHER
M16 X 25 ALLEN DOME HEAD S/S
M16 X 270 HEX HEAD BOLT SS
M16 X 30 HEX HEAD BOLT S/S
M16 X 35 HEX HEAD BOLT S/S
M16 X 40 HEX HEAD BOLT S/S
M16 X 60 HEX HEAD BOLT S/S
M16 X 70 HEX HEAD ZP
M16 X 80 HEX HEAD BOLT SS
M2 X 9 PHILIPS TAP SCREW S/S
M24 NYLOCK NUT S/S
M3 FLAT WASHER S/S
M3 HEX NUT S/S
M3 HEX NUT SS316
M3 INTERNAL TOOTH LOCK WASHER S/S
M3 LOCK WASHER S/S
M3 MINI RIVET BUSH STEEL BZP
M3 NYLOCK NUT S/S
M3 PENNY WASHER S/S
M3 RIVET NUT ALUMINUM
M3 RIVET NUT ZINC PLATED
M3 STANDOFF
M3 X 10 ALLEN CUP HEAD S/S
M3 X 10 ALLEN DOME HEAD S/S
M3 X 10 DOME HEAD CAP SCREW SS
M3 X 10 PHILIPS COUNTERSUNK HEAD S/S
M3 X 10 PHILIPS PAN HEAD S/S
M3 X 100 ALLEN CUP HEAD S/S
M3 X 100 PHILIPS PAN HEAD S/S
M3 X 12 ALLEN DOME HEAD S/S
M3 X 12 PHILIPS COUNTERSUNK HEAD S/S
M3 X 15 ALLEN DOME HEAD S/S
M3 X 16 ALLEN DOME HEAD S/S
M3 X 16 PHILIPS PAN HEAD S/S
M3 X 20 ALLEN CUP HEAD S/S
M3 X 20 ALLEN DOME HEAD S/S
M3 X 20 BLIND RIVET
M3 X 20 PHILIPS PAN HEAD S/S
M3 X 25 ALLEN CUP HEAD S/S
M3 X 25 ALLEN DOME HEAD S/S
M3 X 25 PHILIPS PAN HEAD S/S
M3 X 30 ALLEN CUP HEAD S/S
M3 X 30 ALLEN DOME HEAD S/S
M3 X 30 PHILIPS PAN HEAD S/S
M3 X 35 ALLEN CUP HEAD S/S
M3 X 35 ALLEN DOME HEAD S/S
M3 X 40 ALLEN CUP HEAD S/S
M3 X 40 ALLEN DOME HEAD S/S
M3 X 40 PHILIPS PAN HEAD S/S
M3 X 45 ALLEN CUP HEAD S/S
M3 X 45 ALLEN DOME HEAD S/S
M3 X 5 ALLEN CUP HEAD S/S
M3 X 50 ALLEN DOME HEAD S/S
M3 X 50 PHILIPS PAN HEAD S/S
M3 X 75 ALLEN CUP HEAD S/S
M3 X 75 PHILIPS PAN HEAD S/S
M3 X 8 ALLEN CUP HEAD S/S
M3 X 8 ALLEN DOME HEAD S/S
M3 X 90 ALLEN CUP HEAD S/S
M3 X 90 PHILIPS PAN HEAD S/S
M3 X M3 X 6MM HEX STAND M/F BRASS
M30 FLAT WASHER S/S
M4 X 12 SELF-TAPPING SCREW S/S
M4 BLIND RIVET NUT ZP (CLOSED)
M4 FLANGED NYLOC NUT S/S
M4 FLAT WASHER STAINLESS
M4 HEX NUT S/S
M4 INTERNAL TOOTH LOCK WASHER S/S
M4 LOCK WASHER S/S
M4 NYLOC NUT S/S
M4 PENNY WASHER S/S
M4 RIVET NUT STEEL GALVANIZED
M4 RIVET NUT ZP
M4 SERRATED HEX FLANGE NUT S/S
M4 X 10 ALLEN COUNTERSUNK HEAD S/S
M4 X 10 ALLEN CUP HEAD S/S
M4 X 10 ALLEN DOME HEAD S/S
M4 X 10 BLIND RIVETS SS
M4 X 10 HEX HEAD S/S
M4 X 10 PHILIPS COUNTERSUNK HEAD S/S
M4 X 10 PHILIPS PAN HEAD S/S
M4 X 100 ALLEN CUP HEAD S/S
M4 X 100 PHILIPS PAN HEAD S/S
M4 X 12 ALLEN COUNTERSUNK HEAD S/S
M4 X 12 ALLEN DOME HEAD S/S
M4 X 12 BLIND RIVET
M4 X 12 PHILIPS PAN HEAD S/S
M4 X 12mm RIVET NUT ZP (LONG SPLINE)
M4 X 15 SELF TAPPING SCREW
M4 X 16 ALLEN COUNTERSUNK HEAD S/S
M4 X 16 ALLEN CUP HEAD S/S
M4 X 16 ALLEN DOME HEAD S/S
M4 X 16 BLIND RIVET SS
M4 X 16 BLIND RIVETS ALUMINIUM
M4 X 16 HEX HEAD BOLT S/S
M4 X 16 PHILIPS COUNTERSUNK HEAD S/S
M4 X 16 PHILIPS PAN HEAD S/S
M4 X 20 ALLEN COUNTERSUNK HEAD S/S
M4 X 20 ALLEN CUP HEAD S/S
M4 X 20 DOME HEAD S/S
M4 X 20 HEX HEAD S/S
M4 X 20 PHILIPS COUNTERSUNK HEAD S/S
M4 X 20 PHILIPS PAN HEAD S/S
M4 X 25 ALLEN CUP HEAD S/S
M4 X 25 ALLEN DOME HEAD S/S
M4 X 25 PHILIPS COUNTERSUNK HEAD S/S
M4 X 25 PHILIPS PAN HEAD S/S
M4 X 30 ALLEN CUP HEAD S/S
M4 X 30 ALLEN DOME HEAD S/S
M4 X 30 HEX HEAD S/S
M4 X 30 PHILIPS COUNTERSUNK HEAD S/S
M4 X 30 PHILIPS PAN HEAD S/S
M4 X 35 ALLEN CUP HEAD S/S
M4 X 40 ALLEN CUP HEAD S/S
M4 X 40 ALLEN DOME HEAD S/S
M4 X 45 ALLEN CUP HEAD S/S
M4 X 5 ALLEN COUTERSUNK HEAD S/S
M4 X 50 ALLEN CUP HEAD S/S
M4 X 50 PHILIPS PAN HEAD S/S
M4 X 60 ALLEN CUP HEAD S/S
M4 X 75 PHILIPS PAN HEAD S/S
M4 X 8 ALLEN DOME HEAD S/S
M4 X 8 HEX HEAD S/S
M4 X 8 PHILIPS PAN HEAD S/S
M4 X 9.8 SELF-CLINCHING BLIND FASTENERS
M4X16 PHILIPS HEAD SCREW
M5 BLIND RIVET NUT S/S
M5 FLANGEDD NYLOC NUT ZP
M5 FLAT WASHER
M5 FLAT WASHER S/S
M5 FLAT WASHER ZP
M5 HEX NUT S/S
M5 LOCK NUT
M5 LOCK WASHER S/S
M5 NYLOCK NUT S/S
M5 PENNY WASHER S/S
M5 RIVET NUT ALUMINUM
M5 RIVET NUT FLUSH MOUNT ZINC PLATED
M5 RIVET NUT ZP
M5 X 10 ALLEN COUNTERSUNK HEAD S/S
M5 X 10 ALLEN CUP HEAD S/S
M5 X 10 ALLEN DOME HEAD S/S
M5 X 10 HEX HEAD S/S
M5 X 10 PHILIPS PAN HEAD S/S
M5 X 10 PHILLIPS COUNTERSUNK S/S
M5 X 100 PHILIPS PAN HEAD S/S
M5 X 12 ALLEN DOME HEAD S/S
M5 x 12 PHILIPS SELF TAPPING SCREW S/S
M5 X 16 ALLEN COUNTERSUNK HEAD S/S
M5 X 16 ALLEN CUP HEAD S/S
M5 X 16 ALLEN DOME HEAD S/S
M5 X 16 HEX HEAD S/S
M5 X 16 PHILIPS COUNTERSUNK HEAD S/S
M5 X 16 PHILIPS PAN HEAD S/S
M5 X 20 ALLEN COUNTERSUNK HEAD S/S
M5 X 20 ALLEN CUP HEAD S/S
M5 X 20 ALLEN DOME HEAD S/S
M5 X 20 BLIND RIVET ALUMINIUM
M5 X 20 HEX HEAD S/S
M5 X 20 PHILIPS COUNTERSUNK HEAD S/S
M5 X 20 PHILIPS PAN HEAD S/S
M5 X 25 ALLEN CUP HEAD S/S
M5 X 25 ALLEN DOME HEAD S/S
M5 X 25 HEX HEAD S/S
M5 X 25 HEXBOLT S/S
M5 X 25 PHILIPS COUNTERSUNK HEAD S/S
M5 X 25 PHILIPS PAN HEAD S/S
M5 X 30 ALLEN CUP HEAD S/S
M5 X 30 ALLEN DOME HEAD S/S
M5 X 30 HEX HEAD S/S
M5 X 30 PHILIPS COUNTERSUNK HEAD S/S
M5 X 30 PHILIPS PAN HEAD S/S
M5 X 35 PHILIPS COUNTERSUNK HEAD S/S
M5 X 35 PHILIPS PAN HEAD S/S
M5 X 40 ALLEN CUP HEAD S/S
M5 X 40 ALLEN DOME HEAD S/S
M5 X 40 HEX HEAD S/S
M5 X 40 PHILIPS PAN HEAD S/S
M5 X 5 ALLEN COUNTERSUNK HEAD S/S
M5 X 60 ALLEN CUP HEAD S/S
M5 X 60 ALLEN DOME HEAD S/S
M5 X 60 HEX HEAD S/S
M5 X 60 PHILIPS PAN HEAD S/S
M5 X 75 ALLEN CUP HEAD S/S
M5 X 75 ALLEN DOME HEAD S/S
M5 X 75 HEX HEAD S/S
M5 X 75 PHILIPS PAN HEAD S/S
M5 X 8 ALLEN CUP HEAD S/S
M5 X 8 ALLEN DOME HEAD S/S
M5 X 8 HEX HEAD S/S
M5 X 9.8MM SELF-CLINCHING BLIND FASTENERS S/S
M5 X 90 ALLEN CUP HEAD S/S
M5 X90 HEX HEAD S/S
M6 X 40 HEX HEAD S/S
M6 ALUMINUM RIVET (17.5MM)
M6 ALUMINUM RIVET (20.4MM)
M6 BLIND RIVET ZP (CLOSED)
M6 FLANGEDD NYLOC NUT ZP
M6 FLAT WASHER MILD STEEL
M6 FLAT WASHER S/S
M6 FLAT WASHER ZINC PLATED
M6 HEX FLANGED NUT STAINLESS STEEL
M6 HEX NUT S/S
M6 LOCK WASHER S/S
M6 NYLOC NUT S/S
M6 PENNY WASHER S/S
M6 RIVET NUT ALUMINUM
M6 RIVET NUT STEEL GALVANIZED
M6 RIVET NUT ZP
M6 T-NUT SS
M6 THUMB NUT (CLOSED END)
M6 X 10 ALLEN CUP HEAD S/S
M6 X 10 ALLEN DOME HEAD S/S
M6 X 10 HEX HEAD S/S
M6 X 10 PHILIPS COUNTERSUNK HEAD S/S
M6 X 100 ALLEN DOME HEAD S/S
M6 X 100 HEX HEAD S/S
M6 X 12 ALLEN CUP HEAD S/S
M6 X 12 PHILIPS HEAD COUNTERSUNK S/S
M6 X 16 ALLEN COUNTERSUNK HEAD S/S
M6 X 16 ALLEN CUP HEAD S/S
M6 X 16 ALLEN DOME HEAD S/S
M6 X 16 HEX HEAD S/S
M6 X 16 PHILIPS COUNTERSUNK HEAD S/S
M6 X 16 SELF TAPPING SCREW SS
M6 X 20 ALLEN CUP HEAD S/S
M6 X 20 ALLEN DOME HEAD S/S
M6 X 20 HEX HEAD S/S
M6 X 20 PHILIPS COUNTERSUNK HEAD S/S
M6 X 20 PHILIPS PAN HEAD S/S
M6 X 20 THUMB SCREW PLASTIC HEAD
M6 X 20 YELLOW CHROMATE BOLT STEEL
M6 X 25 ALLEN CUP SCREW S/S
M6 X 25 ALLEN DOME HEAD S/S
M6 X 25 HEX HEAD S/S
M6 X 25 PHILIPS PAN HEAD S/S
M6 X 3/16 FLAT WASHER
M6 X 3/8 SELF TAPPING SCREW S/S
M6 X 30 ALLEN CUP HEAD S/S
M6 X 30 ALLEN DOME HEAD S/S
M6 X 30 HEX HEAD S/S
M6 X 35 ALLEN CUP HEAD S/S
M6 X 35 ALLEN DOME HEAD S/S
M6 X 35 HEX HEAD S/S
M6 X 40 ALLEN COUNTERSUNK HEAD S/S
M6 X 40 ALLEN CUP HEAD S/S
M6 X 40 ALLEN DOME HEAD S/S
M6 X 45 ALLEN CUP HEAD S/S
M6 X 45 HEX HEAD S/S
M6 X 45 PHILIPS PAN HEAD S/S
M6 X 50 ALLEN DOME HEAD S/S
M6 X 50 HEX HEAD S/S
M6 X 60 ALLEN CUP HEAD S/S
M6 X 60 ALLEN DOME HEAD S/S
M6 X 60 HEX HEAD S/S
M6 X 75 ALLEN CUP HEAD S/S
M6 X 75 ALLEN DOME HEAD S/S
M6 X 75 HEX HEAD S/S
M6 X 8 ALLEN CUP HEAD S/S
M6 X 80 HEX BOLT S/S
M6 X 90 ALLEN DOME HEAD S/S
M6 X 90 HEX HEAD S/S
M6 Y-Bolt
M6 Y-Nut
M8 BLIND RIVET NUT ZP (CLOSED)
M8 FLANGED NYLOCK NUT ZINC PLATED
M8 FLAT WASHER S/S
M8 Flat Washer Stainless
M8 FLAT WASHER ZP
M8 HEX NUT S/S
M8 HEX NUT ZINC PLATED
M8 LOCK WASHER S/S
M8 LOCK WASHER ZP
M8 NYLOC NUT S/S
M8 NYLOC NUT ZP
M8 PENNY WASHER S/S
M8 PENNY WASHER ZP
M8 RIVET NUT ALUMINUM
M8 RIVET NUT STEEL GALVANIZED
M8 RIVET NUT ZP
M8 SERRATED HEX FLANGED NUT S/S
M8 X 10 ALLEN CUP HEAD S/S
M8 X 10 ALLEN DOME HEAD S/S
M8 X 10 HEX HEAD ZP
M8 X 100 EXTENSION STUD
M8 X 100 HEX HEAD S/S
M8 X 12 ALLEN COUNTERSUNK HEAD S/S
M8 X 16 ALLEN CUP HEAD S/S
M8 X 16 ALLEN DOME HEAD S/S
M8 X 16 HEX HEAD ZP
M8 X 20 HX HEAD SS
M8 X 20 ALLEN CUP HEAD S/S
M8 X 20 ALLEN DOME HEAD S/S
M8 X 20 HEX HEAD ZP
M8 X 25 ALLEN COUNTERSUNK BOLT S/S
M8 X 25 ALLEN DOME HEAD S/S
M8 X 25 THUMB SCREW
M8 X 25 YELLOW CHROMATE BOLT STEEL
M8 X 25MM HEX HEAD ZP
M8 X 30 ALLEN COUNTERSUNK HEAD S/S
M8 X 30 ALLEN CUP HEAD S/S
M8 X 30 ALLEN DOME HEAD S/S
M8 X 30 EXTENSION STUD
M8 X 30 HEX HEAD BOLT ZINC PLATED
M8 X 30 HEX HEAD S/S
M8 X 30 PHILIPS PAN HEAD S/S
M8 X 40 ALLEN CUP HEAD SS
M8 X 40 ALLEN DOME HEAD S/S
M8 X 40 HEX HEAD ZP
M8 X 45 EXTENSION STUD
M8 X 50 ALLEN DOME HEAD S/S
M8 X 50 ALLEN DOME HEAD ZP
M8 X 55 ALLEN CUP HEAD HALF-THREADED S/S
M8 X 60 ALLEN DOME HEAD S/S
M8 X 60 HEX HEAD S/S
M8 X 65 HEX BOLT ZINC PLATED
M8 X 75 ALLEN DOME HEAD S/S
M8 x 90 ALLEN COUNTERSUNK S/S
M8x35 ALLEN COUNTERSUNK BOLT
MINI RIVET BUSH M4X16 SWG, STEEL BZP
NO. 10 x 5/8 PHILLIPS PAN HIGH-LOW THREAD
Nut Nyloc Insert UNC SSA2 3/8
Nylon Insert HX Nut SSA2 985 M10
Nylon Insert HX Nut SSA2 985 M5
Over Center Fastener Pad Lockage
PASS THROUGH STUD KIT BLACK
PASS THROUGH STUD KIT RED
Penny Flat Washer G.I. 1/4X3/4
Penny Washer GI M10 (OD:28mm)
Penny Washer MS 1/4
Penny Washer ZN 6.4X20X1.25
Philips JF Bolt SS M2x10
Piano Hinge 26mm X 1m Stainless Steel 304
PINCH WELD
PLASTIC DRINK CUP HOLDER
PN-HD CR Screw UNC SSA2 1/4
QUICK DISCONNECT AERIAL FROM BASE
Rivet Nut CounterSunk (1,5,4)-9X17-M6 AL
Rivet Nut CounterSunk (1,5-4)-7X13-M5 AL
RUBBER SEALING BLACK 12.4MM X 9.5MMX 20MM
Rubber Sheet 1m x 2m x 2mm
Rubber Sheet 1m x 2m x 4mm
RUBBER STOPPER WITH M6 HOLE
S-M10-1ZI SELF CLINCHING NUT
S-M4-2ZI SELF CLINCHING NUT
S-M6-1ZI SELF CLINCHING NUT
S-M8-1ZI SELF CLINCHING NUT
S-M8-2ZI SELF CLINCHING NUT
S/S U-BOLT W/ FLATTENED PART
S/S U-BOLT W/ FLATTENED PART (M10 X 43 X 70MM)
S/S U-BOLT W/ FLATTENED PART (M10x62)
SCREW ON RIVET
SEALING STRIP 11 MM X 16.8 MM
Security Lock Key Triangular
Single Junction Stud Black
Single Junction Stud Red
SKT HD Cap Screw SS M4x10
SKT HD Cap Screw SS M4x12
Soldering Lead 0.6mm
Soldering Lead 1.2MM
SP-M10-1 SELF-CLINCHING NUT, S/S
SP-M4-2 SELF-CLINCHING NUT S/S
SP-M5-2 SELF-CLINCHING NUT, S/S
SP-M6-1 SELF-CLINCHING NUT, S/S
SP-M8-1 SELF-CLINCHING NUT, S/S
SP-M8-2 SELF-CLINCHING NUT, S/S
SPANNER LOCK TRIGONOMETRY
Spring Base
Spring Bolt
SPRING STEEL WASHER ALUMINUM
SS-M5-2ZI SLFCLNCH NUT CAR STL
STAINLESS CUP
Stainless Door Hinge
Stainless Draw Latch
STAUFF CLAMP HEAVY DUTY
STAUFF CLAMP TWIN
SWIVEL MALE FITTING
TERMINAL BLOCK STUD JUMPER BLACK
TERMINAL BLOCK STUD JUMPER RED
TERMINAL BLOCK STUD WITH COVER RED
Terminal Stud 3/8 Black
Terminal Stud 3/8 Red
Torque Nut Nyloc M6 Steel
TRIGONOMETRY KEY
Vehicle Antenna Base
Hardware and Terminal Studs
Field Service Catalogue...
Search all parts:
Part Number
All Fields
Return to Previous Page
HMWS PART NUMBER
Specifications are available to approved Trade Customers.
Please sign up.
Pricing Information
Pricing information is available to approved Trade Customers. Please sign up.
Return to Previous Page